This kit is equipped with a compressor of the new generation with excess boost pressure of 0.5 bar at 5200 rpm.
Installation does not require serious modifications of the engine. For example, there is no need to change pistons.
Replacement of nozzles and calibration of the ECU is highly recommener.
You can install this kit on a stock car with ordinary tools. If your car has a steering booster – please state it in the order details.
Specification:
- Supercharger (1 PC.)
- Compressor bracket (1 PC.)
- The hub remote (4 Pcs.)
- Bolts for mounting the compressor M8 (4 Pcs.)
- Bolts for mounting the compressor bracket with gavernie washers (3 PCs.)
- Bracket upper stretch of the belt pulley (1 PC.)
- Upper tensioner pulley belt (1 PC.)
- Bolt bracket upper roller (1 PC.)
- Nut bracket bolt upper roller (1 PC.)
- Remote washer bracket upper roller (1 PC.)
- Remote washer for the top roller M10 5 mm (1 PC.)
- The bracket clips with screws (1 PC.)
- Lower idler rollers of a belt (2 PCs)
- Drive belt (1 PC.)
- Remote washer for the M10 lower rollers 7 mm (2 PCs.)
- Nuts lower rollers M10 (2 PCs.)
- The remote washer under the pulley of the water pump M8 (3 PCs.)
- Bolt cap timing pulley (1 PC.)
- Washer cover bolt M8 timing (1 PC.)
- Pipe aluminum 57 mm L=50 mm (3 PCs.)
- Corrugated hose D=76 mm rubber (1 PC.)
- Elbow silicone 90 degree D=57/63 mm (1 PC.)
- Elbow silicone 90 degree D=57/70 mm (1 PC.)
- Elbow silicone 90 degree D=57 mm (1 PC.)
- Direct silicone tube D=57/70 mm (1 PC.)
- Silicone pipe with flange Blow Off under D=57 mm (1 PC.)
- Cable 50-70 mm (7 PCs.)
- 70-90 mm two clamps on the MAF and one to the corrugation (3 PCs.)
- Clamp 60-80 mm at the compressor (1 PC.)
- Clamp 30 to 45 mm blow-off (1 piece)
- Packaging box (1 piece)
- A pulley of the water pump VAZ 2123 (Niva-Chevrolet);
- Alternator pulley Lada 2112 (shaft mm 15);
- The crankshaft pulley (alternator drive belt) VAZ 2123 (Niva-Chevrolet);
- Cover timing VAZ 2123 (Niva-Chevrolet);
- Filter of ventilation of crankcase gases;
- Air filter of zero resistance.
In operation, the supercharger is virtually silent. Oil and coolant are not required. When you install a supercharger you are not obligated to make changes in the design of the engine, except for replacing the engine front cover, pulleys, alternator, crankshaft, water pump under the V-ribbed belt (VAZ 2123 Niva-Chevrolet) which are included in the kit.
Increase in horsepower with 0.5 bar boost is up to 50%
VAZ 2101 21011 21013 2102 2103 2104 2105 2106 2107 RIVA 2121 21213 2131 NIVA 4x4